.Home | Race Prep | C23 | DURATEC | Race Components | Garage | Gallery | Racing | News | History | Contact
C23 Specification Highlights


C23 Specification

Please note: The C23 is now out of production but all parts are still available for existing cars or part-built projects.
Mamba Motorsport have taken the superb C23 a step further with the C23R and C23T. Whilst retaining the classic good looks of the Classic 23, the 520kg C23R and C23T are lighter and more powerful.

The C23 still has near perfect weight distribution for the purest driving experience and now when fitted with our DURATEC engine and transaxle combination we achieve power-to-weight ratios of over 500bhp/tonne. The information below highlights some of the key design points that make the C23 such an outstanding track car...

Lightweight, fully-triangulated Spaceframe Chassis All-Alloy Suspension Components
Chassis
+ Fully-Triangulated Spaceframe
+ All joints Bronze Welded
+ Corrosion Resistant Powder Coating
+ Laser-Cut Brackets
+ 1.2mm wall tubing
+ Alloy Panelled
+ Floor-Mounted Pedal Box

+ Independent Suspension
+ Double Unequal Length Wishbones
+ Coil-Over Alloy Dampers
+ Anti-Roll Bar (standard C23R)
+ All-Alloy Uprights
+ Minimising Unsprung Weight

Suspension
Composite Bodywork Race Components
Composite Bodywork

+ Hollow Fibre Composite Panels
+ Additional Front Ducting
+ Acrylic Wind Deflector
+ Alloy Fuel Tank
+ Composite Seats


+ 4 Pot All-Alloy Calipers
+ Vented & Drilled Front Disks
+ Drilled Rear Discs
+ 10-tooth alloy cased Steering Rack

Race Components
C23 Introduction
C23 Specification
C23R Technical Sheet
C23T Technical Sheet

Copyright (c) 2006