Laser-cut steel mounting plates and fitting kit.
The plates sit between the damper unit and the chassis turret to allow fine suspension adjustment WITHOUT replacing the trunnion.
Set your camber to any value 1.5 - 4.0 degrees. Allows you to dial out any minor inconsistencies.
Note: the plates raise the inner pivot centre which gives improved toplink geometry for cars using shorter than standard springs. This results in less bumpsteer and less camber-gain in roll (ie more grip!)
We have full alignment setup in-house and can fit these and setup the camber and toe for you. Call for setup price.
4-6 week lead time at the moment but contact us for an accurate delivery estimate or if you need them urgently.